http://www.cnhxin.com
  
 
    HX Products Code
 
    Float Switch
 
    Controller
 
   Fluid Level Controller
   Fluid Level Control Box
   Pressure Switch
 
    Microswitch
 
    Push-button Switch
 
Pressure-Switch

| Descriptions

    Lowest Pressure:20PSI

    Highest Pressure:80PSI

    Male:Z1/4"

    Presure Settings:20~40PSI、30~50PSI、40~60PSI

   Coverage:USR,CNR-encloseed,double pole,single phase pressure operated switch to be used for the auto-control of water pump。

    Testing Standards:UL standards 508 of America,Canadian standards C22.2 NO.14-95

    Electric Ratings:

Single phase
Single phase
Single phase
115V AC
230V AC
230 AC
1.5HP 20A
2.0HP 12A
3.0HP 17A

| Descriptions

    Pressure Range:0.7-3Bar

    Max current:5A

    Male & Female:Z1/4"、Z3/8"

    Rated Voltage:110V-220V

    Max Pressure:3Bar

    Pressure Settings:1.0~1.7Bar  1.1~1.8bar

| Descriptions

    Like HXF-PC1,this type is also to be used for the auto-control of the motor of the water pump except that there is an additional metal span on the one.Whenever the water in pool or tank is in low level,the switch will automatically cut down and close the motor.To use the motor again.just switch the span and power will be connected for motor's normal operation.

    Pressure Range:20PSI~80PSI

    Low Water Level Protection:10PSI

    Pressure Setting:20~40PSI、30~50PSI、40~60PSI

    Environmental Rating:Type 3R

    Electric Rantings:

Single phase
Single phase
Single phase
115V AC
230V AC
230 AC
1.5HP 20A
2.0HP 12A
3.0HP 17A

| Descriptions

    Max Temperature:140°F

    Max Pressure:150PSI

    Water Tank:120加仑

    Model:AV-45 AV-100

    Coverage:Air Volume controls are designed to insure the proper balance of air and water in a water pressure sysytem.They prolong pump life by reducing the cycling frequency and can be use onjet,centrifugal and rotary pumps。

| Descriptions

    Function:The starting operation archived,the unit is programmed to perform all the pump control operations automatically.When praticular operational breakdowns occur,such as water failure,obstruction of the suction pipe,etc,the unit recognizes the breakdown and red led failure lights up,at the same time a stop signal is sent to the pump to prevent damages caused by its working in the absence os water.Rectification of the failures that have caused the blockage ,allows the system to be restarted by pressing the Reset button。

    Rated Voltage:220V~240V  110V~115V

    Max Current:10A

    Frequency:50~60HZ

    Max Power:1.1KW

    Joint Screw:1"

    Protection Grade:IP65

    Starting pressure to choose:1.5bar,2.2bar

    Coverage:As a completely new device,it can guarantee the optimum control of electric pumps used in a plumping systems.Being a intelligent mix of hydaraulic and electronic engineering,the control maintains both pressure and flow and controls the operation of the pump automatically.It needs no pressure tank as in the traditional systems.There are no plenum chambers to recharge and no irritating variation in pressure and in flow at the point of use.No adjustment or maintenvance is required,It is absolutely dependable,durable and simple to install.

| Descriptions

    Rated Voltage:220V~240V  110V~115V

    Max Current:10A

    Frequency:50~60HZ

    Max Power:1.1KW

    Joint Screw:1"

    Protection Grade:IP65

2005 CopyRight(C) Yueqing Huxin Electric Co.Ltd.